贵州快3

Language
Industry Application
AutoEngine Case Surface bonding
AutoEngine Case Surface bonding 

Industrial introduction:

 

The auto engine case sealing usually adopts the seal ring and gasket, but with the structure optimization, case thinning, and smaller mounting space for the seal ring/gasket, the glue sealing has become the best choice for the case sealing.

 

Features

•  The glue tape and line is uniform from the beginning to the end, and the connection is flat and smooth;

 

•  The glue line is delicate and the glue line has a diameter of 0。8-1。3mm, for the over thin line leads to bad sealing and over thick line leads to glue overflow;

 

•  It uses double-glue and highly adhesive glue. The glue should be immediately formed after being squeezed out when it exceeds 300,000 CP, and strict requirements concerning the glue ratio should be met.

  •  
Advantages

•    The glue valve developed independently in combination with the imported pressure plate pump and voltage stabilizer ensures the uniformity and stability of the glue extrusion;

 

•   The floor-type robot can ensure the convenience of work stations, and the highly stable structure design can also guarantee the long-term stable work of the device;

 

•   Integrated solution: the combination of robot with dispensing system can avoid the error from the combination and facilitate the master machine management and use;

 

•   Maintenance cost: compared with traditional gear pump and screw pump maintenance, here only replacement of related sealing elements instead of the whole pump is needed。 It greatly cuts down the maintenance cost。

 

Solution

•  AS-400 cabinet robot

 

•   Pressure plate pump;

 

•   Voltage stabilizer;

 

•   C-1020M controller

 

•   V-1020HV two-component valve;

 

•   V-470 glue valve

Related Product
青海快3 陕西快乐十分 9号福彩网 贵州快3官网 9号福彩网 甘肃快3 博九福彩网 四川快乐12 博九福彩网 9号福彩网app下载